Training Center of After-Sales Department Chery International
5. Window & anti-pinch sunroof system
91
2. Operation of window regulator system (with anti-pinch function)
Description of window lifter (with anti-pinch function):
For the window lifter with anti-pinch function, the FL door non-local switch is connected to
BCM receiving terminal, and each local switch is connected to the corresponding anti-pinch
control module. The motor is directly driven by anti-pinch control module, and LIN
communication is provided between BCM and anti-pinch module.
①
When the key is located at ON, or within 2 minutes after the key is turned from ON to
ACC/OFF:
②
Operate the window lifter switch
Manual mode: Long press the window lifter switch, and the glass will act; release the switch,
and the glass will stop lifting.
Automatic mode: Short press the window lifter switch, and the corresponding glass will lower
automatically; press the switch again, and the glass will be stopped.
If any front door is opened within 2 minutes after the key is turned to ACC or OFF, the window
lifter will be deactivated. If all doors are closed within the two minutes, the lifter will be no
longer activated.
When the window lifter motor is working, if the key is turned to START, the motor will stop
working immediately. After the engine is started, the glass will remain stopped.
MASHINESOFT.COM
09120146259
