Training Center of After-Sales Department Chery International
2. PEPS system
45
5. Notices in operation and maintenance
①
Replace smart key
There are two ways to match smart key and system: add new key, add old key.
“Add new key” is match the blank key (the key which has never been correlated with any system)
and the system. It allows add new key in addition to the old key.
“Add old key” is to add an old key to enable the user to delete all keys in the after-sales service
station to disable the missing key and then add keys by adding old keys.
Operation procedure of “Add new key”:
1. Read the VIN by scanner from ECU, and apply the PIN from CHERY.
2. Put the key in cup holder which marked with key icon, enter the match program interface,
select “Add new key” menu, input PIN.
3. After “Add new key” procedure is finished, press the unlock button and check whether the left
and right turning lamps on the instrument cluster are flashing or not. If flashing, the new key is
matched successfully, otherwise, the matching is failure.
IMMO system
System components: Smart key, ECU, TCU(for CVT vehicle), PEPS module.
If any part of the system is damaged and replaced, the system should do the program match.
MASHINESOFT.COM
09120146259
