Training Center of After-Sales Department Chery International
4. BCM
83
3. Function description
27
Wiper
washer
Turn on washer switch, the washer motor will start working until the washer
switch is released.
With the key at ON, short pull the washer switch, the wiper will work at low
speed. After the wiper works 2 cycles, it will return to original position.
With the key at ON, long pull the washer switch(≥1s), and then release the
switch, the wiper will work at low speed, and the wiper will work for at least 3
cycles before it returns to original position.
With the key at ON, turn the wiper switch to LO position, the wiper will work
at low speed; if the key is turned to ACC/OFF, the wiper will return to original
position automatically after the working cycle is finished.
With the key at ON, turn the wiper switch to HI position, and the wiper will
work at high speed; if the key is turned to ACC/OFF, the wiper will return to
original position automatically after the working cycle is finished.
28
Cruise
Operate the cruise switch, and BCM will send relevant signals (refer to
signals).
MASHINESOFT.COM
09120146259
