SQR7080 Maintenance Manual 372 Engine Mechanical System
Remove timing cover cap
Torque: 6±1N.m
Remove timing pulley damper
Remove the tensioner
（１）
Carry out the operation at the upper thrust point
of compression of the first cylinder piston
(2) After removing the timing cover cap,turn the bolt
and rotate the timing gear clockwise with wrench,align
timing mark of camshaft timing gear with the cam
mark of camshaft cover cap;
Attention: You can rotate the engine clockwise
only,after installing the pulley;
Before removal,make a arrow mark on the position of
timing mark,assemble according to original state.
(3) Make sure that the crankshaft timing pulley wheel
mark is aligned with the mark of the oil pump.
(4) Remove the tensioner bolt, and take off the
tensioner
Do
“
mark
”
Timing mark
Clockwise
Timing mark
Chery Automobile Co., Ltd
5
