SQR7080 Maintenance Manual 372 Engine Mechanical System
5 Install the timing cover cap
Attention
6±1N.m
SST
6 Install the torsional vibriation damper (use SST)
１）
When there is no a flying wheel,
①
Use the gear belt of SST to wrap part of the
crankshaft pulley .
②
Lever of SST should be pulled to be immovable
(fixed),pay attention not to make the gear belt
moving,tighten the bolt according to the specified
torque of 98.0±10N.m{10±1kgm}
torque
98.0±10N.m{10±1kgm}
SST
（
4
）
、
When there is a flying wheel,
①
Use SST to prevent the toothed ring from turning
②
Then tighten bolt of torsional vibriation damper.
3
、
Camshaft
3-1 Configuration diagram (the dismounting and installation of the clockwise belt are to be carried out in
the following procedures)
Chery Automobile Co., Ltd
11
