SQR7080 Maintenance Manual 372 Engine Mechanical System
3-5 Installation
①
Under the circumstance of using SST,use the special
tools for fixing at the two
φ
6 holes of the camshaft gear
S/A.
②
Turn the slae gear to the right, match the mark hole
on the slave gear with the mark on the master gear, or
align the marks on the slave gear with the mark on the
master gear; then fix the slave gear with bolt. (thread:
M5; pitch: 0.8)
SST
2
、
Installation of the camshaft
[Attention] Size of the axial clearance of the camshaft
(1)
、
Smear lubricating oil at the camshaft gear section
and the cylinder cover axial diameter section.
(2)
、
Fix the camshaft slave gear by roughly adjusting on
the cyliner cover.
(3) It is necessary to measure the size of axial clearing
of camshaft.
Exhaust
Intake
（
4
）
Install camshaft,the timing mark must be aligned
shown as the right figure.
（
5
）
Smear lubricating oil on the camshaft assembly, the
gears and the cyliner head axial diameter section.
3 Tighten the camshaft bearing cap shown as right
figure.
4 Remove the bolt for fixing the slave gear of the
camshaft assembly.
Chery Automobile Co., Ltd
15
