18
LED STATUS INDICATOR
The system includes an RGB LED that shows the device’s status during installation:
Solid RED:
the device is not included in any network
Solid BLUE:
the device is Offline setup mode
4 GREEN blinks then OFF:
the device has been just added to a Z-Wave network in S2
Authenticate Mode
4 BLUE blinks then OFF:
the device has been just added to a Z-Wave network in S2
Unauthenticated Mode
4 RED blinks then OFF:
the device has been just added to a Z-Wave network without
security
Sequence of GREEN-BLUE
Learn Mode for inclusion
Sequence of RED-BLUE
Learn Mode for exclusion
TIP:
To test if the electrical connections are correct, before the inclusion of the
device, while pressing
n
times the external switch, the RGB LED should flash
green
for the same amount of times. If it does not, check the wire connections.
E
NG
L
IS
H
Содержание META 4 CH PWM DIMMER 7
Страница 2: ......
