CHERUBINI META 4 CH PWM DIMMER 7, Инструкция по эксплуатации

Страница: 6 / 14

ELECTRICAL CONNECTIONS DIAGRAM
17
E
NG
L
IS
H
1) Make sure the main switch is set to the OFF position
2) Connect the device based on the diagrams provided
3) Turn the main switch to the ON position
4) Include the device in the Z-Wave network
DEVICE INSTALLATION
TIP: The antenna must not be shortened, removed or
modified. To ensure maximum efficiency, it must be
installed as shown.
Large size metal equipment near the antenna can negatively
affect reception. Each device is a node in a mesh network. If
there are metal obstacles, the obstacle can often be overcome
with a further triangulation node.