TM-G746A Rev.: B
DCR# 17-0231
DATE: 3/21/17
Federal Identification Code: 11815
© 2017 Cherry Aerospace
7
RIVETER REPAIR AND MAINTENANCE
This riveter has been manufactured to give maximum service with minimum care.
In order to keep the tools in optimum operating condition, it is advisable to set-up a Preventive Maintenance check list
including, at a minimum, the following:
•
Visually inspect the tool to make sure it is in good working condition and there are no fluid leaks
•
Make sure the tool is bled regularly (page 15)
•
Check the service sticker due date; service the tools on a regular basis.
Should repair or service be necessary, follow the instructions given below.
CAUTION
•
Read the tool manual instructions; it is advised that repair is conducted only by properly trained personnel.
•
Make sure the air is disconnected.
•
Protect the sealing surfaces to avoid damage.
Tools and Service Kits Needed
•
Make sure that the proper service kit (
ordered separately
) and tools are available.
o
SERVICE KIT:
G746AKS –(contains Springs, Seals, O-Rings and Back-up Rings
o
TOOLS:
G701/G704KT
– tool kit and a
Needle Nose Pair of Pliers
700A61
700B65
P1178
837B700
836B700
700A77
701A67
700A60
