TM-G746A Rev.: B
DCR# 17-0231
DATE: 3/21/17
Federal Identification Code: 11815
© 2017 Cherry Aerospace
3
The Cherry® G746A riveter is a compact but powerful riveter designed for
high productivity, reliable installation of Cherrymax AB, Cherrylock A
wiredraw blind fasteners, MBC and nutplate blind rivets.
TECHNICAL SPECIFICATIONS
Cherry® Aerospace (CHERRY®) policy is one of continuous development.
Specifications shown in this document may be subject to change which may
be introduced after publication. For the latest information always consult
CHERRY®.
AIR PRESSURE
90 to 120 PSI (6.2 to 7.6 bar)
STROKE
0.875 inch (22.23 mm)
MIN. PULLING-FORCE: 1850 lbs. @ 90 psi (8.23 kN @ 6.2 bar)
WEIGHT
4.25 lbs. (2.26 kg)
CYCLE TIME
One Second Approximately
NOISE LEVEL
72 dB (A)
VIBRATION
Less than 2.5 m/s
2
AIR CONSUMPTION
3.9 CFM (110.5 liters/M) at 20 Cycles/Minute
PUTTING THE TOOL IN SERVICE
The tool must be used with an air pressure regulator. Even if your
shop air pressure is below the maximum recommended range, pressure spikes in your air-lines could cause serious damage to
the tool or cause safety concerns.
Tools equipped with an in-line Air Pressure
Regulator (P1505) may be attached to any shop
air-line.
Tools NOT equipped with an in-line Air Pressure Regulator
(P1505) MUST be connected to a dedicated regulated air-line.
