DESCRIPTION
The Cherry G715A Pneumatic-Hydraulic
Riveter is designed specifically for the most
efficient installation of Cherry Rivets. It weighs
only 4 lbs. and can be operated in any position
with one hand.
The G715A Riveter is 10-5/8"high, has a 1-
1/8" stroke and generates a minimum of 1400
lbs. of pull on 90 to 110 psi of air pressure at the
tool. See chart on following page for tool
capacity.
PULLING HEADS
Pulling heads are not furnished with this tool but must be ordered separately.
In ordering heads be sure to specify the shank diameter and head style
(universal or countersunk) of the rivets to be installed.
The following pulling heads will fit directly on the G715A Riveter:
G6H Series ....
For installing 100, 200, 300 and 500 Series Knob Stem Cherry Rivets.
H80 Series .....
For 600, 700 and 800 Series High-Clinch Cherry Rivets.
H615 Series ...
For 2000 Series Locked Spindle, Flush Fracturing Cherrylock Rivets.
H9015 Series .
For 9000 Series Serrated Stem Cherry Rivets.
INSTALLING PULLING HEADS ON RIVETER
1.
Engage threads of pulling head inside nose fitting (1)
and turn head clockwise until the threads bottom out.
2.
Tighten jam nut to lock pulling head in desired position.
