HOW T
O LIGHT & BURN SAFEL
Y 6.3
32
CHEMINÉES
PHILIPPE
RADIANTE 873
»
Fire lighters
»
Kindling
»
Well seasoned, split hardwood
»
A lighter or match sticks
MATERIALS REQUIRED
TIME
BEFORE STARTING
LIGHTING OPTION A:
TOP DOWN METHOD (RECOMMENDED FOR BEGINNERS)
»
Ensure the damper, primary and secondary air inlets are fully open
»
Before loading, remove any larger pieces of debris from the previous fire. It is recommended to leave a
bed of ash inside the fireplace and to never clean it out completely during the colder months
»
Avoid overloading the unit, wood should only be burnt on the grate itself
LIGHTING OPTION B:
TRADITIONAL METHOD
STEPS
1.
Place two layers of cut hardwood in a cross section on top of
the fireplace grate. The first layer should be the largest pieces,
positioned front to back. The second pieces should be slightly
smaller in size and positioned side to side
2.
Then follow the same cross section method for the kindling
3
.Firestarters should then be evenly positioned between the two
layers of kindling on the back, middle and front of the kindling
4.
Once the kindling has caught properly close the door and wait
for the first hardwood log to light before adjusting the primary and
secondary air vents accordingly
STEPS
1.
Place two layers of kindling in a cross section on top of the
fireplace grate. The first layer should be positioned front to back. The
second layer the pieces should be positioned side to side
2.
Place 2-3 pieces of cut hardwood over the kindling to form a
pyramid
3
.Firestarters should then be evenly positioned between the two
layers of kindling on the back, middle and front
4.
Once the kindling and hard wood has caught properly close the
door adjust the primary and secondary air vents accordingly
