-.,1:::11::.-..:.=-=:�ii\i-=:�-
Lid Release
Button
Correct Method
To open the centrifuge lid, press
the "Lid Release" button down.
13. OPERATION
Lid Release
Button
To operate this Micro Centrifuge, the below steps should be followed:
Correct Method
1. Connect the power adaptor & Switch 'On' from the rear side so that the display
will show you the fix RPM readings.
2. Load the rotor symmetrically to avoid accidents and damage to the centrifuge.
4. Close the lid & flip ON the front switch to start centrifugation.
5. Once the centrifugation is completed, turn the front switch to "Off" to gradually
stop the rotor.
6. After the rotor has stopped, press the lid release button and open the lid with
your thumb in front and fingers on the top-simply lift the lid back on the hinge.
7. If you want to stop the centrifuge quickly, push the lid release button and the
rotor will stop within a few seconds.
In the following pages the routine centrifuge operation procedures are explained in
brief.
TIME
&
SPEED SETTINGS AND DISPLAY
