8
3 Setup
3.1 Turning the Photometer On
Press the
ON/OFF
key. For 30 seconds, the Start menu appears listing the measuring modes. The measuring
mode last selected is highlighted. The status line indicates the meter name and the version number of the
software. After about 30 seconds, the meter automatically switches to the measuring
mode and measured parameter used last.
3.2 Inserting a Cell
Inserting a 28 mm cell
Remove the black 13 mm adapter if it is in the sample compartment. Make sure that the dust cover is pushed
upward. Insert a 28 mm cell into the sample compartment using downward pressure to ensure that it is fully
seated.
Inserting a Vacu-vials® Ampoule (13 mm)
-
Requires installation of an adapter
#
Installing the 13 mm Adapter
Make sure that the dust cover is pushed upward. Insert the black 13 mm adapter into the sample
compartment with the proper orientation (silver ball plunger in the cell shaft goes to the right). Use downward
pressure to ensure that the adapter is fully seated.
#
Inserting the 13 mm Vacu-vials® Ampoule
Insert the Vacu-vials ampoule into the sample compartment using downward pressure to ensure that it is fully
seated. Place the light shield over the ampoule.
