Chelsio Communications Chelsio T4 Скачать руководство пользователя страница 45

Страница: 45 / 511

Chapter I. Chelsio Unified Wire

Chelsio T5/T4 Unified Wire for Linux

Page 45

5.2.

Configuring network-scripts

A typical interface network-script (e.g. eth0) on RHEL 6.X looks like the following:

# file: /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE="eth0"

HWADDR=00:30:48:32:6A:AA

ONBOOT="yes"

NM_CONTROLLED="no"

BOOTPROTO="static"

IPADDR=10.192.167.111

NETMASK=255.255.240.0

In the case of DHCP addressing the last two lines should be removed and

BOOTPROTO="static"

should be changed to

BOOTPROTO="dhcp"

The

ifcfg-ethX

files have to be created manually. They are required for bringing the

interfaces up and down and attribute the desired IP addresses.

5.3.

Creating network-scripts

To spot the new interfaces, make sure the driver is unloaded first. To that point

ifconfig -a |

grep HWaddr

should display all non-chelsio interfaces whose drivers are loaded, whether the

interfaces are up or not.

[root@host~]# ifconfig -a | grep HWaddr
eth0 Link encap:Ethernet HWaddr 00:30:48:32:6A:AA

Then load the driver using the

modprobe cxgb4

command (for the moment it does not make

any difference whether we are using NIC-only or the TOE-enabling driver). The output of
ifconfig should display the T5/T4 interfaces as:

[root@host~]# ifconfig -a | grep HWaddr
eth0 Link encap:Ethernet HWaddr 00:30:48:32:6A:AA
eth1 Link encap:Ethernet HWaddr 00:07:43:04:6B:E9

eth2 Link encap:Ethernet HWaddr 00:07:43:04:6B:F1

On earlier versions of RHEL the NETMASK attribute is named IPMASK. Make sure
you are using the right attribute name.

Note

Содержание Chelsio T4
































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chelsio T4

Отзывы:

Бренды по названию

Популярные бренды

Chelsio Communications Chelsio T4, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Chelsio T4

Отзывы:

Бренды по названию

Популярные бренды