Chelsio Communications Chelsio T4, Инструкция по установке и эксплуатации

Страница: 284 / 511

XX. Unified Wire Manager (UM)
Chelsio T5/T4 Unified Wire for Linux
Page 284
Before accessing these modules, you will have to create groups and then add members to that
group. Once done, you can select the group in the modules and the new setting will be applied
to all members of that particular group.
Manage Groups
This is where you can add, delete and manage groups. Use the Create a Group section to
create a group by specifying a
gent’s platform and group type. There are various types of groups
to choose from depending on the type of configuration setting you want to change. For example,
to change the MTU size of a network interface (in the Network Configuration module), create a
group with group type
Network . To install or erase option ROM on a Chelsio T4 adapter (in the
Boot Configuration module), create a group with group type t4adapter .
Here is a list of available configuration modules and corresponding group type:

Boot Configuration: t3adapter,t4adapter,t5adapter

Network Configuration: Network

Card Configuration: t3adapter,t4adapter,t5adapter

Port Configuration: t3port, t4port,t5port

Bypass Configuration: Network
After the group has been created, add members to that group using the Add a member row
button. Depending on the group type selected, you may be asked to provide additional details
for the new member. Use the
Fetch Details button to do so and finally click Save a member
button to add the member to the group.
To delete a group, select it from the Select a Group drop-down list, and click Delete Group. To
delete a member from a group, select the group to which the member belongs, select the radio
button corresponding to the member to be deleted in the
SNO field and finally click Delete
Member(s).
Figure 7.4.6 (a)
– Creating a group