Chelsio Communications Chelsio T4, Инструкция по установке и эксплуатации

Страница: 31 / 511

Chapter I. Chelsio Unified Wire
Chelsio T5/T4 Unified Wire for Linux
Page 31

To build and install NIC driver without offload support :
[root@host~]# make nic
[root@host~]# make nic_install

To build and install NIC driver with offload support and Offload drivers:
[root@host~]# make toe
[root@host~]# make toe_install

To build and install Offload drivers without IPv6 support:
[root@host~]# make toe_ipv4
[root@host~]# make toe_ipv4_install

To build and install iWARP driver against outbox OFED:
[root@host~]# make iwarp
[root@host~]# make iwarp_install

To build and install RDMA Block Device driver:
[root@host~]# make rdma_block_device
[root@host~]# make rdma_block_device_install

To build and install all drivers without IPv6 support:
[root@host~]# make ipv6_disable=1
[root@host~]# make ipv6_disable=1 install

The above step will not install Bypass driver. Run the following commands to install it:
[root@host~]# make bypass
[root@host~]# make bypass_install