Electric Induction hobs Chef’s EH-IH535
23
12. Operating the timer
12.1 Basics
The timer module contains up to 2timers. 1timer which can be assigned for the
cooking zones and 1 independent timer called “ egg - timer”. The two 7 -
segment displays show the remaining time until the alarm is activated.
All timers work as count down timers. The operation range is between 1 min to
99min.
The “egg timer” stays active after switching the control off.
Audible signal with timing, two cooking zones are invidiually programmable
cooking zone - Timer from 0 to 99 minutes.
In order to assure clear assignment of the actual displayed remaining
time to a cooking zone, each cooking zone has a luminous symbol which is fully
lighted when the timer for this cooking zone is displayed in the 2 digit 7 - segment
display.
If the timer of a cooking zones is not active the symbol is inactive. If a cooking
zone timer is active but not displayed on the 2 digit 7 - segment display the
luminous symbol is illuminated half (dimmed). Alternatively this differentiation
can also be done using flashing or static luminous symbols.
12.2 Activating Cooking Zone Timer
Switching on the TC enables timer setting for dedicated cooking zones:
By actuating a cooking zone (cooking zone stage > 0) followed byselecting the
timer display (within 10 sec) a timer value may be assigned to the cooking zone as
an cut-off function. The LED around the timer indicates which cooking zone the
timer had been activated for.
As soon as the timer is selected the according LED is blinking and the dot in
the timer display is flashing permanently. In case of a cooking zone is selected
there after , the dot extinguishs and the LED stops blinking.
