Chefmate GC512, Инструкция по эксплуатации

Страница: 16 / 20

Page 16
DO NOT USE VEGETABLE OIL TO LUBRICATE SLICER.
VEGETABLE OIL WILL DAMAGE THE SLICER!
Sharpener Shafts
It is necessary to lubricate the sharpener shafts with Globe oil weekly.
1. Loosen the sharpener release knob.
2. Push the sharpener forward and apply oil to the main shaft that
the sharpener moves on (Fig. 16-1).
3. Move the sharpener back and forth to distribute the oil.
4. Remove the front cover of the sharpener by unscrewing the knob
(Fig. 16-2) until the cover becomes loose and comes off.
5. Put several drops of Globe oil on the shaft behind each sharpening stone.
6. Place the front cover back onto the sharpener and secure it in place.
7. Pull the sharpener back to its original position.
8. Push down on the sharpener and tighten the sharpener release knob to secure it in place.
9. Wipe off any excess oil that drips onto the slicer.
End Weight Slide Rod
The end weight slide rod should be lubricated weekly (or when excessive drag is
felt) with a few drops of Globe oil.
1. Apply a few drops of Globe oil to the slide rod (Fig. 16-3).
2. Slide the end weight up and down to distribute the oil.
Globe recommends that an authorized Globe service
company perform all adjustments and major maintenance.
By adequately maintaining your slicer,
it will provide years of dependable service.
Simple Maintenance and Repair
Figure 16-3
Figure 16-1
Slide Rod
Main Shaft
Knob
Figure 16-2