Page 9
DO NOT hold the food product with your hand. Never put you hand on or around food chute when
slicer is on. The food chute handle is the only part of the slicer you should touch while slicing.
5. Use the food chute handle to manually push the food chute back and forth. The food chute handle is the only
part of the slicer you should touch while slicing. Do not catch slices with your hand. Let slices drop onto the
receiving
area.
If a product needs to be adjusted during slicing, ALWAYS pull the food chute all the way towards
you. Turn off slicer, and close slicer table prior to adjusting the product and the end weight.
6. After the last slice stroke, pull the food chute all the way towards you. Turn the slicer off by pushing the stop
button. The power indicator light will go out. Always turn slice thickness dial clockwise until it stops to close
the slicer table.
7. Now you can load and unload food product from the food chute.
AUTOMATIC SLICER OPERATION
1. Make sure the slicer is turned off (power indicator light not illuminated). Make sure auto engage lever is in
“Manual” position (Fig. 9-1) and the food chute moves freely.
2. Pull the food chute completely towards you and place the food product onto the food chute. Slice only
boneless, unfrozen product with the slicer. Swing the end weight into position to secure food product.
3. Rotate the slice thickness dial counterclockwise to the desired setting. After slicing is complete, always turn
the slice thickness dial clockwise until it stops to close the slicer table.
4. Press the start button. The power indicator light will illuminate (see page 4 for location).
BE ALERT. The next step will cause the food chute to move automatically and it can move either
direction on start up.
NEVER attempt to adjust, load or unload food chute when slicer is in automatic operation.
NEVER put hand into the chute arm opening on the right side of the slicer.
6. To make the food chute move automatically, pull up or raise the auto
engage lever into the “Automatic” position (Fig. 9-2).
7. To stop the automatic movement of the food chute, push down or lower
the auto engage lever to the “Manual” position.
The knife is still rotating even though the chute has stopped.
8. To turn the slicer completely off and stop the knife, press the stop button.
If the auto engage lever has not already been returned to the “Manual”
position, push down or lower the lever to the “Manual” position.
Operating Instructions
Figure 9-2
Figure 9-1
