USA
9
AFTER SALES SUPPORT
888-315-8407
MODEL: RJ14-M-S SERIES
Operating Instructions (cont'd)
BREWING INSTRUCTIONS
1. Lift the lid and pour up to 16 oz of cold water into the water tank.
The water level indicator lines are marked on the inside back wall of the unit.
IMPORTANT: Never exceed the MAX 16 oz fill line.
2. Place an empty mug on the drip tray.
3. If required, place the permanent filter in the removable filter basket.
4. Plug the Coffee Maker into a 120V AC electrical wall outlet only.
5. Press the brew button, then the red light will illuminate and the Coffee Maker
will begin the brew cycle.
NOTE: To interrupt the brewing process at any time, remove plug from wall outlet.
6. Upon completion of the brew cycle, do not remove the mug until the dripping
has ceased
7. Unplug the Coffee Maker from the wall outlet.
CAUTION: Use extreme caution when opening the lid after brewing. Any residual
water in the tank will be discharged from the shower as hot steam.
GROUND COFFEE
Use standard drip coffee grind.
1. Place the permanent filter in the removable filter basket. Add ground coffee
and close lid. Approximately 1 level tablespoon is recommended per cup (5 oz)
of coffee desired. For stronger or milder coffee, adjust amount of coffee ground
to suit your taste.
2. Using the desired cup size as your measure, add cold water to the water tank.
3. Center the mug under the nozzle and follow steps 4-7 from the brewing
instructions.
NOTE: The amount of brewed coffee will always be less than the amount of
water placed into the water reservoir; as much as 10% is absorbed by coffee grounds
and filter.
POD COFFEE
Use any standard single serve pod.
1. Remove the permanent filter from the removable pod/filter basket.
Place 1 or 2 pods directly into the pod/filter basket and close lid.
2. Using the desired cup size as your measure, add cold water to the water tank.
3. Center the mug under the nozzle and follow steps 4-7 from the brewing
instructions.
