Before installing your range hood, carefully follow these steps:
1. Read This Manual
Read through all the steps. If you fail to read the instructions
carefully, we will not be responsible for damages incurred on
your part. If you’re not confident in your abilities to install the
range hood properly, we recommend hiring a certified
technician to complete the installation. While reading through
the manual, ensure you have the necessary tools and parts
according to the previous page.
2. Remove Packaging
Open the box and carefully unbox the range hood. Remove
any packaging, including the plastic wrap and protective
plastic film, from the hood and the chimney covers. You can
use stainless steel cleaner to wipe down the surface if desired.
Keep all packaging materials until you are satisfied with our
product.
3. Ensure There is Proper Height Clearance
To ensure the highest performance, the bottom of your range
hood must be between 24” and 30” from the top of the
cooking surface. For gas ranges, the required distance is 30”.
Installing at the incorrect height could lead to drastic reduc-
tion in the range’s performance or even cause a fire.
4. Check Your Power Supply and Ducts
Check to ensure your main voltage is in line with the
required voltage outlined on the rating plate inside this
hood. Also check the domestic power supply to guaran-
tee adequate earthing before installation.When ducting
to the outside, don’t connect the range hood to exhaust
ducts that carry any type of combustion fumes like
fireplaces, boilers, or any similar items. The vents should
have a short, straight run to the outside. Avoid any elbows
if possible, and if an elbow is required, a minimum of a
12” straight run is imperative before the elbow.
8. Find a Helper
This range hood is best installed by two or more people
due to its size and weight. Again, it is recommended to
hire a certified technician for installation to reduce the risk
of damage or injury.
Preparation: What to Do Before Installation
WM-630 USER MANUAL
6
24”
minimum
Hood
Hood
Roof Cap
Wall Cap
Duct
