Cheetah 64NEX Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 66

background image

Cheetah 64NEX Digital Video Router

Publication 81-9059-0685-0, Rev. A

March 2011

Proprietary Information of PESA

8-4

8.2

A

PPENDIX

B:

SNMP

The Cheetah Matrix Frame Controller contains an SNMP v2c agent, which is also compatible with
SNMP v1 management stations. The agent supports the following standards:

  RFC 1903 – SNMPv2 Textual Conventions
  RFC 1904 – SNMPv2 Conformance Statements
  RFC 1905 – SNMPv2 Protocol Operations
  RFC 1906 – SNMPv2 Transport Mappings
  RFC 1907 – SNMPv2 SNMP MIB Objects
  RFC 1908 – SNMPv1 Coexistence
  RFC 2011 – SNMPv2 IP MIB Objects
  RFC 2012 – SNMPv2 TCP MIB Objects
  RFC 2013 – SNMPv2 UDP MIB Objects

Two  enterprise  MIBs  are  used  to  provide  full  control  of  Cheetah  Switchers.    The  first,  PESA-
TC.MIB,  is a MIB,  which  defines  some  textual  conventions.    The  second,  PESA-MATRIX.MIB,
contains  objects,  which  allow  SNMP-based  control  and  monitoring  of  one  or  more  Cheetah
Switchers.

Note that the agent within the Matrix Frame Controller implements a subset of the PESA-MATRIX
MIB. The optional Group tables are reserved for implementation within the System Controller.

The agent is capable of managing multiple Cheetah Switchers. This is accomplished in two steps:

a) Connecting the Cheetah Switchers via the RS-422 Aux Frame Port described in this manual.

b) Set the Matrix Frame Controller, which is to communicate with your SNMP management

application to NETPRC Master. Note that if you have redundant Matrix Frame Controllers
in the Switcher, BOTH must be configured as NETPRC Master. Refer to the Ethernet
section described earlier in Appendix A to accomplish this.

c) Set all other Matrix Frame Controllers, which you have connected, to the NETPRC Master

controller to NETPRC Slave.

The agent will then be able to configure and control all of the Cheetah Switchers in the connected
collection.

Once you have configured the Matrix Frame Controller's SNMP agent (as described in Appendix
A), you may issue SNMP commands. The following commands were issued on a PC running
Linux against a pair of small Cheetah Switchers.

«
...
47
48
49
50
51
...
»

Содержание 64NEX



































































Отзывы:

Нет отзывов

Похожие инструкции для 64NEX

Бренд: jablotron Страницы: 2

EdgeSwitch 10 XP

Бренд: Ubiquiti Страницы: 13

Бренд: Crestron Страницы: 2

Бренд: FCI Страницы: 12

Premasreg 716 Series

Бренд: S+S Regeltechnik Страницы: 32

Бренд: Cable Electronics Страницы: 16

Бренд: Lantech Страницы: 24

Бренд: Linksys Страницы: 2

Бренд: Banner Страницы: 8

Бренд: Omron Страницы: 31

Бренд: EnGenius Страницы: 72

Бренд: Smartwares Страницы: 2

Бренд: Rose electronics Страницы: 36

CoreBuilder 7000

Бренд: 3Com Страницы: 516

Бренд: CYP Страницы: 12

Бренд: HP Страницы: 64

ProCurve 1710-24

Бренд: HP Страницы: 12

ProCurve 1400-24G

Бренд: HP Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды