Cheetah 64NEX Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 66

background image

Cheetah 64NEX Digital Video Router

Publication 81-9059-0685-0, Rev. A

March 2011

Proprietary Information of PESA

8-3

Help on how to change one of these settings can be obtained by entering the command 'HE ET'
(for Help Ethernet) at the '>' prompt. For example,

>he et

        Syntax: ET < DHCP [ON|OFF]  | IP [addr]     | GW [addr]     |
              :      SN [addr]      | DP [port]     | TN [ON|OFF]   |
              :      TP [tport]     | TL [pass]     | RCOMM [str]   |
              :      WCOMM [str]    | TCOMM [str]   | TRAP [ON|OFF] |
              :      AUTH [ON|OFF]  | TARGET [addr] | NP [MASTER|SLAVE] >
        Where :  DHCP ON enables client automatic IP address negotiation.
              :  IP [addr] allows you to set the IP address of the PMFC.
              :  GW [addr] allows you to set the gateway address.
              :  SN [addr] allows you to set the subnet mask.
              :  DP [port] allows you to set the NETPRC IP port.
              :  TN ON enables the on-board telnet server.
              :  TP [port] allows you to set the telnet port.
              :  TL [pass] allows you to set the telnet login password.
              :     where addr is in dotted notation (ex. 192.168.1.1}.
              :     where port is in the range [1000...65535].
              :     where tport is in the range [23,1000...65535].
              :  RCOMM [str] allows you to set the SNMP read community string.
              :  WCOMM [str] allows you to set the SNMP write community string.
              :  TCOMM [str] allows you to set the SNMP trap community string.
              :  TRAP ON enables SNMP traps.
              :  AUTH ON enables authentication traps.
              :  TARGET [addr] allows you to set the trap target IP address.
              :  NP [MASTER|SLAVE] sets the NETPRC type of the PMFC.
>et

        MAC address : 02:02:02:02:02:0a
        SERIAL #    : EEEEEE000000001
        DHCP        : ON
        IP address  : 192.168.000.114
        Subnet mask : 255.255.255.000
        Def Gateway : 192.168.000.002
        NETPRC      : SLAVE
        NETPRC port : 1000
        TELNET      : ON
        TELNET port : 23
        TELNET pass :
        RCOMM       : public
        WCOMM       : private
        TCOMM       : public
        TRAP        : OFF
        AUTH        : OFF
        TARGET      : 000.000.000.000

For example, to set the read community string to 'pesa', enter

>ET RCOMM pesa

and press return. To view your changes, wait for the '>' prompt and enter 'ET'.

«
...
46
47
48
49
50
...
»

Содержание 64NEX



































































Отзывы:

Нет отзывов

Похожие инструкции для 64NEX

Бренд: B&B Electronics Страницы: 26

Бренд: B&B Electronics Страницы: 15

Бренд: B&B Electronics Страницы: 45

Бренд: H3C Страницы: 17

Бренд: Edimax Страницы: 2

ZigBee Mini Hub

Бренд: ORVIBO Страницы: 3

Бренд: Hama Страницы: 2

SIL IntelliPoint RF S*R*L Series

Бренд: Ametek Страницы: 93

Бренд: Eaton Страницы: 5

Бренд: Intel Страницы: 162

CEFLA PIR DALIP

Бренд: DANLERS Страницы: 2

Бренд: LevelOne Страницы: 76

Бренд: NETGEAR Страницы: 8

SBX 95 SE - AV Control 4

Бренд: Vivanco Страницы: 16

Бренд: Linksys Страницы: 2

Бренд: Whelen Engineering Company Страницы: 5

Бренд: DVIGear Страницы: 11

Бренд: ATEN Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды