CHEE SIANG INDUSTRIAL M100 Series, Инструкция по эксплуатации

Страница: 41 / 57

- 38 -
Parameter
Code
Parameter Function
Range / Selection Unit
Remarks
136.b3
Upper limit of maximum
speed at Large pitch change
function
[r/min]
500
～
5000
100
138.MS
Walking foot lifting maximum
speed [r/min]
200 ～ 5000
100
139.WS
Walking foot lifting minimum
speed [r/min]
200 ～ 4800
100
(Sewing speed at HP_output)
140.THP
Delay timing prior to
HP speed
[ms]
80
～
500
1
142.Min
Minimum stroke value of
potentiometer for walking
foot lifting
0
～
1023
－
Min. stroke adjusted by the potentiometer
at machine head.
143.MAX
Maximum stroke value of
potentiometer for walking
foot lifting
0
～
1023
－
Max. stroke adjusted by the potentiometer
at machine head.
144.FK1
Thread Nipper start angle
[degrees]
0 ～ 359
1
FK output start angle setting.
Valid only when FK output active.
145.FK2
Thread Nipper end angle
[degrees]
0
～
359
1
FK output end angle setting.
Valid only when FK output active.
146.FK3
Thread Holder start angle
[degrees]
0
～
359
1
FK2 output start angle setting.
Valid only when FK2 output active.
147.FK4
Thread Holder end angle
[degrees]
0 ～ 359
1
FK2 output end angle setting.
Valid only when FK2 output active.
GOLDEN WHEEL