USER MANUAL
8
4.3.2
Continuous measurement
The CO mode is the measuring mode of continuous measurement
:
Press the probe vertically against the surface to be measured. The instrument will beep continuously and
display the coating thickness reading when the readings have been taken
.
Note
:
During the measurement, do not lift the probe off the surface to be tested until the measurement is
complete. The screen will be displayed in the next picture:
4.4 Me
asuring range
The device measures layer thicknesses between 0 μm and 1250 μm. If the thickness is outside this range,
"---" will appear in the display. The screen will be shown in the next picture:
4.5 Batter
y indicator
The device is powered by four AAA batteries. If the
icon is green, the battery is fully charged. After
a period of use, the battery icon will become shorter, indicating the current capacity of the battery.
starts flashing, the battery is almost dead.
When the color changes from green to red and
Note
:
Please recharge the batteries or replace them when they are nearly empty. Otherwise, this could
affect your measurement accuracy.
