![background image](http://html.mh-extra.com/html/checkbox/hsone/hsone_setup-and-user-manual_2594983012.webp)
Network Setup
You probably will not need to make any changes in
the network setup of your CheckBox system as
most Internet Service Providers use DHCP,
Dynamic Host Configuration Protocol, to tell the
devices connected to their network what address
and other parameters to use.
If your Internet Service Provider uses static IP
addresses, or if you are connecting CheckBox to a an internal company network you
may need to set some network parameters manually.
To enter Network Setup click on
Network Setup
on the top menu. The Network Setup
page will appear. Enter the parameters as provided by your Internet Service Provider or
network administrator. After you have entered the parameters press update and then
reboot to restart the system.
Local Address
refers to the IP addresses the CheckBox system assigns to users on the
system. By default this address is in the 192.168.17.xxx range. This setting should not
be changed under most circumstances. If there is a need to change this address range,
select
Local
from the menu on the right hand side and enter the new address range in
here, press update and reboot they system.
NEVER SET THE LOCAL ADDRESS
RANGE TO BE THE SAME AS THE ADDRESS RANGE OF THE INTERNET
CONNECTION
. This will cause routing errors and you will lose contact with the unit.
Your CheckBox system, like most wireless access points, announces it’s presence by