Check Point VSX-1 3070, Руководство по началу работы

Страница: 23 / 48

Initial Configuration
Chapter 2 Installation and Configuration 23
Initial Configuration
In This Section
Logging in for the First Time
To log in to the VSX-1 appliance for the first time:
1. Connect to the appliance’s Serial console using the cord
received in your shipping carton: RJ45/D subminiature
cable.
The Serial console settings should be as follows:
• Speed: 9600
• Data bits: 8
• Parity: None
• Stop bit: 1
2. Log in for the first time using
admin
as the default
username and password. Follow the on-screen instructions
to change the password, and optionally, to change the
administrator username.
3. Press Enter . The command prompt appears.
4. Type:
expert
to enter the high privilege command line
access. Log in to expert mode using the username and
password set in
step 2 .
Logging in for the First Time page 23
Configuring the Management Interface page 25
Setting Network and Time/Date Properties page 27
Selecting Cluster Options page 27
Completing the Configuration page 28
VSX_Appliance_GettingStarted.book Page 23 Thursday, February 5, 2009 3:56 PM