Check Point VSX-1 3070, Руководство по началу работы

Страница: 27 / 48

Initial Configuration
Chapter 2 Installation and Configuration 27
Setting Network and Time/Date
Properties
To set the system time and date:
1. In the Time and Date Configuration screen, set the time zone ,
date , and local time according to the on-screen
instructions. Type n to continue.
2. Type n again to proceed to the Check Point Configuration
Program.
3. Read and type y to accept the license agreement and
proceed to the clustering options.
Selecting Cluster Options
To enable VSX clustering features:
1. The question, "Would you like to install a Check Point
clustering product?” appears.
• If you want to enable VSX clustering, type y .
• If you do not want to install cluster functionality, type
n and proceed to “Completing the Configuration” on
page 28 .
2. You are asked if you want to enable the Per Virtual System
State . This feature is required for the Virtual System Load
Sharing (VSLS) and Per Virtual System High Availability
features.
VSX_Appliance_GettingStarted.book Page 27 Thursday, February 5, 2009 3:56 PM