Check Point Quantum Spark 1570R, Руководство по началу работы

Страница: 14 / 78

Setting up the Appliance
Quantum Spark 1570R Appliance R80.20.XX Getting Started Guide | 14
To mount the appliance to the wall (standard):
1. Place the wall-mount sticker on the wall and drill two holes for the screws.
2. Insert the screw anchors into the wall.
3. Attach the 2 screws in the accessory kit (M4*6) to the wall.
4. Mount the appliance and verify the 2 screws are fastened well to the appliance.
To mount the appliance to the wall (side brackets):
The side wall mount brackets are not part of the kit and are sold separately as an FRU.
1. Attach each bracket to the side of the 1570R appliance. Use 2 screws for each bracket. (#2 on the
diagram)
2. Use the holes on the bracket (#1 on the diagram) to mark the screw placement on the wall or surface.
Insert a screw through each hole and make sure the appliance is securely fastened..