Check Point QUANTUM SMART-1, Руководство по началу работы

Страница: 10 / 34

Configuring Smart-1 Appliances
Quantum Smart-1 600-M Appliances Getting Started Guide | 10
Configuring Smart-1 Appliances
Starting the Appliance
Connect the appliance to a power source and turn on the appliance. When the appliance is ready, you can
run the First Time Configuration Wizard to configure it.
To start the appliance:
1.
Connect the appliance's management interface to a PC with the included Ethernet cable.
2.
Connect both power cables to the power supply units in the rear panel.
3.
If the power did not come up, press the
Power
button to power it up.
4.
The appliance turns on.
When the appliance is ready, you can run the First Time Configuration Wizard to configure it.
Available Software Images
The Smart-1 600-M appliance comes with the R81 software image.
To follow the installation progress and see when the appliance is ready, connect to the appliance with a
serial console cable.
For more about software images, see the
Smart-1 600-S/600-M/6000-L/6000-XL home page
.
Initial Configuration
Configure the appliance with the Gaia First Time Configuration Wizard. See the
Quantum Smart-1
Appliances Quick Start Guide provided with your appliance.
Advanced Configuration
You can configure advanced options on Gaia OS from the Gaia Portal or the Gaia Clish.
Connecting to the Smart-1 Appliances CLI
To connect to the command line interface of the Smart-1 Appliances, use one of these:
n
Use the included serial console cable (DB9-to-DB9), or the DB9-to-RJ-45 adapter, and a terminal
emulation software, such as PuTTY (from Windows) or Minicom (from Unix/Linux).
n
Use an SSH connection to the management interface (if SSHD is configured).