Creating the Power-1 Object in SmartDashboard
Configuring
Power-1 Page 13
c
Click
Finish
to complete the First Time Configuration Wizard. The machine will automatically restart
(this may take several minutes).
Note
- It is recommended to backup the system configuration. The
backup menu can be accessed via the WebUI interface under the
Appliance
menu. For further details, see the
Power-1 Administration
Guide
included on the CD.
Creating the Power-1 Object in
SmartDashboard
Configure the Power-1 appliance as a gateway object in the Security Management Server database.
1. Launch SmartDashboard.
2. Configure a new gateway object for the appliance.
3. Enter the IP address for the Power-1 appliance.
4. For a distributed installation, establish Secure Internal Communication (SIC) using the activation key
entered in the First Time Configuration Wizard.
5. Configure the topology.
6. Install the security policy.
Advanced Configuration
Advanced configuration can be done using the
sysconfig
menu which can be accessed using the
command line interface only. For example, configuring the appliance to be a DHCP server.
Note
- The
sysconfig
menu is only available after
running the
First Time Configuration Wizard
in the
WebUI.
CLI access can be obtained by console connection or through SSH.
