Integrity Advanced Server Installation Guide
8
To back up your Integrity installation:
1. Make a copy of the entire home directory and save it to a safe location.
The default is C:\Program Files\Zone Labs\Integrity for 5.x versions and
C:\Program Files\CheckPoint\Integrity for 6.x versions.
2. Back up your database.
If your installation includes an embedded database, your backup is already
complete.
If your installation uses a third-party database, use the preferred vendor-specific
tool to back up the database.
Upgrading and Migrating Integrity Advanced Server
You can preserve some of the data from a previous installation of Integrity Advanced
Server.
Integrity Advanced Server supports two methods of changing from an earlier to a later
version of Integrity Advanced Server:
Upgrading —To upgrade from 6.0.448.01 and later versions, select the Upgrade
option in the installer. You will later be prompted to choose a location. Specify the
current location of your Integrity installation.
Migrating —To change to a higher version from an Integrity Advanced Server 5.x
installation, you must install the new Integrity Advanced Server and migrate your
data. See
Chapter 4, Migrating Data,
for more information. You can only migrate
from versions that are 5.1 or later but prior to 6.0.
No other upgrades are supported.
Performing a New Integrity Advanced Server Installation
Use the steps in this chapter to perform a new Integrity Advanced Server installation.
To install and configure the Integrity Advanced Server:
1. Gather the database information and configure your databases.
See “
Configuring the databases and gathering information,”
on page
9
.
2. Synchronize clocks.
See “
Synchronizing Clocks,”
on page
12
.
Before upgrading Integrity Advanced Server, you should first back up your existing
installation. See “
Backing up an existing installation,”
on page
7
.