Rack Mounting for 5000, 6000, 7000, TE100X, and Smart-1 405/410 Appliances
Rack Mounting for 5000, 6000, 7000, TE100X, and Smart-1 405/410 Appliances | 15
3. Repeat steps 1 and 2 for the other telescopic rack rail unit.
Item
Description
1
Inner rack rail
2
Release latch
3
Outer appliance rail
To install the inner appliance rails to the appliance:
1. Place the appliance rail on the side of the appliance and make sure:
n
The release latch is facing away from the appliance
n
The arrow on the release latch points to the front of the appliance
n
The appliance rail extends past the back panel of the appliance
2. Install the appliance rails to the side of the appliance with the provided screws. Refer to the below
appliance rail images for 5600, 5800, 5900, 6400, 6500, 6600, 6700, 6800, 6900, and 7000
appliances.
Note that in 5100, 5200, 5400, 6200, Smart-1 405, Smart-1 410, and TE100X appliances, each side
uses 3 screws.
Note - Do not overtighten the screws. Check Point recommends that you leave the rail mounting
screws loose until the server is completely installed. This eases installation by preventing binding of
the server in the rack.
3. Do steps 1 and 2 again to install the appliance rail on the other side of the appliance.
