UN41 0643MN
C
A
B
UN41 0644MN
A
B
C
English language
Use and maintenance
30
INFORMATION FOR USE
6
Arrangement of the seat and seedling holder
Poor work posture will tire the operator and could lead
to mistakes being made; therefore, before starting work,
adjust the seat and secure it in the position that offers
maximum comfort.
Proceed as outlined below.
1) Loosen the screws (
A
) and adjust the seat height.
2) Tighten the screws (
A
) to secure the seat in the right
position.
3) Loosen the nut (
B
) to move the seat lengthways in
relation to the vehicle.
4) Tighten the nut (
B
) to secure the seat in the right po-
sition.
5) Loosen the screw (
C
).
6) Set the seedling container into the appropriate posi-
tion.
7) Tighten the screw (
C
).
Changing the dispenser chain
According to the plant spacing required, it may be nec-
essary to install a chain fitted with a different number of
grippers with respect to those already installed.
Carry out the operations described.
1) Loosen the nuts (
A
) to slacken off the chain.
2) Remove the joining link (
B
).
3) Remove the chain (
C
).
4) Fit the chain on the pinions along with the required
number of grippers.
5) Fit the joining link (
B
).
NOTICE
Fit the chain with the joining link positioned as
shown in the figure.
6) Tension the chain (see “Adjusting the dispenser chain
tension”).
Содержание FOX DRIVE PLUS
Страница 2: ......
Страница 223: ......
Страница 224: ...VIA GUIZZARDI 38 40054 BUDRIO BO ITALY TEL 051 80 02 53 FAX 051 69 20 611 www checchiemagli com info checchiemagli com...
