Checchi & Magli 998963, Руководство по эксплуатации и обслуживанию

Страница: 15 / 20

15
To circulate on the road, you must comply with the Highway Code in force
in the relative country.
During transportation on the road, put the command lever of the hydraulic
cylinder in the locked position with the unit carrier frame raised.
Operators must be seated with their feet on the footboards,
only with the
tractor stationary and locked and with the machine placed on the
ground.
It is strictly forbidden to make any movements on the work field and
on the road with operators on board.
It is forbidden to get off the machine when in movement and not positioned
on the ground.
The movement apparatus (wheels
– chains – distributors – etc…) are
protected by covers and where it is not reasonably possible, a sufficient
space is provided to not incur in crushing.
Totally avoid using flowing clothes which can get caught up in the
above mentioned apparatus during functioning, and however pay strict
attention during work as the apparatus is always moving.
Do not remove safety and protection devices which have been installed.
If they are removed for adjustments or maintenance, make sure they are
put back into place.
Frequently check the efficiency of the protection devices and replace them
when necessary, using only original spare parts, that can be supplied by
the Manufacturer or by its authorized dealers.
Do not let unskilled persons use the machine
; in the case of accidents
you may be personally held responsible.
It is strictly forbidden to raise or lower the unit carrier frame with
operators on board.
Check that during lifting or lowering operations of the element carrier
frame that persons who are not involved in the operations are at a
safe distance.
13.
LOADING WATER
Proceed as follows to fill the water barrels:
13.1- Make sure that the unit carrier frame is in a horizontal position
compared to the ground (see Fig.5 page 14).
The tractor must be switched off with the service brake on.
The tractor must be on solid and level ground.
No one must use and/or tamper with the hydraulic commands.
13.2-
Approach the barrels by using only the platforms Fig.5 page 14.
13.3- Unscrew the barrel cover and fill to the maximum capacity.