Checchi & Magli 998963, Руководство по эксплуатации и обслуживанию

Страница: 10 / 20

10
6.
MOUNTING THE TOWBAR
Proceed as follows to mount the tow bar:
6.1- Insert the tow bar A onto the fixed frame as illustrated in the picture.
6.2- Fasten it onto the frame by using screws B and bolts C .
7.
ATTACHING AND DETACHING THE UNIT CARRIER FRAME
Proceed as follows to attach the unit carrier frame:
7.1- The tractor must be switched off with the service brake on.
7.2- The tractor must be on solid and level ground.
7.3- Check that the tow bar is fixed properly onto the fixed frame (see
mounting the tow bar).
7.4- Move the tractor closer and attach it to the fixed frame with the tow bar.
7.5- Mount pivots
“
A
” and ball joints “
B
” in the upper hole as shown in Fig.3
(Warning! Check that spacer
“C” is positioned as in Fig.3).
7.6- Attach the oil inserts of the towing frame to the appropriate inserts
present on the tractor.
7.7- Connect the unit carrier frame to the lift of the towing frame by
mounting tie rod
“
D
” inserting pivots “
E
”, block quick couplings “
F
” Fig.4
7.8- Lift supporting foot
“
G
”.
Proceed as follows to detach the unit carrier frame:
7.1.1- The tractor must be switched off with the service brake on.
7.1.2- The tractor must be on solid and level ground.
7.1.3- Bring the tractor close and by using the tow bar, connect it onto the
fixed frame.
7.1.4- Lower supporting foot
“
G
”.
7.1.5- Lower unit carrier frame.
7.1.6- Remove the pivot
“
E
”, unblock the quick couplings “
F
”.
A
B B
C
C