CHD VS-MIDI, Руководство по установке

Страница: 13 / 16

VS-MIDI
MIDI Interface for Vermona Synthesizer
Model 8-434 ver. 1.0
Copyright © 2009 CHD Elektroservis
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
13
Pic. 2.6-3
2.7. ASSEMBLING OF INTERFACE
a) Put the seven-pin connector of signal bunched cables to plug left on the interface’s board.
Orientation of the connector is unambiguously given by the connector lock (pic. 2.7-1).
b) Put the five-pin connector of supply bunched cables to plug right on the interface’s board.
Orientation of the connector is unambiguously given by the connector lock (pic. 2.7-1).
c) Put two two-pin connectors of MIDI cables to plugs right on the interface’s board. Orientation
of the connectors is unambiguously given by the connectors locks. Be sure the connectors are not
exchanged. MIDI input must be put to plug X3 and MIDI output to plug X4 (see pic. 2.7-2 and 2.7-3).
Pic. 2.7-1 Pic. 2.7-2
Pic. 2.7-3
MIDI - IN
5(-) 4(+)
4(+) 5(-)
MIDI - THRU / OUT
X3
X4
2
1
2
1