CHD VS-MIDI, Руководство по установке

Страница: 11 / 16

VS-MIDI
MIDI Interface for Vermona Synthesizer
Model 8-434 ver. 1.0
Copyright © 2009 CHD Elektroservis
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
11
b) Solder shielded cable Nr. 1 (red – one wire of shielded twin-lead) to left lead of resistor R25
(near operational amp IS1) on VCO board – pad (1) CV.
c) Solder shielded cable Nr. 3 (white – the other wire of shielded twin-lead) to UTS signal on VCO
board – solder lug (3) UTS.
d) Solder the black cable Nr. 2 ( shielding) to ground potential on VCO board – solder
lug (2) GND.
e) Solder the red cable Nr. 7 to signal GATE on VCO board – solder lug (7) Gate.
Pic. 2.5-4 – Solder lugs on EG board
f) Unsolder two blue cables from solder lug ADRS on EG board (pic. 2.5-3) and solder blue cable
Nr. 4 (EG) of signal bunched cables to this lug.
Pic. 2.5-5 – Solder lugs on VCF board