CHD 8-427, Руководство пользователя

Страница: 9 / 32

Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface
P6 P6 P6 P6----M M M M Owner‘s Owner‘s Owner‘s Owner‘s Manual Manual Manual Manual
8 88 8----427 / v. 1.00 427 / v. 1.00 427 / v. 1.00 427 / v. 1.00
Copyright © 2021 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
9
99
9
Fig. 7 Fig. 7 Fig. 7 Fig. 7 – –– – MIDI Notes Shift parameter MIDI Notes Shift parameter MIDI Notes Shift parameter MIDI Notes Shift parameter
4.2.3
4.2.3 4.2.3
4.2.3 VCF CUTOFF M
VCF CUTOFF M VCF CUTOFF M
VCF CUTOFF MODULATION (CC #18)
ODULATION (CC #18) ODULATION (CC #18)
ODULATION (CC #18)
The parameter affects basic VCF cutoff
frequency set by VCF CUTOFF knob on
instrument's panel. It can be changed by MIDI
CC Nr. 18 - see chapter 5.1.2.2.
The parameter value is 0 to 127. For 64 value,
the VCF cutoff frequency isn’t affected. For
parameter values from 65 to 127, the VCF
cutoff frequency is increased and it is decreased
for parameter values from 63 to 0.
Remark:
Remark: Remark:
Remark: IIf you want to use full control range of
this CC, it is recommended to set the VCF
CUTOFF knob on instrument panel to the
middle position. Note that VCF fcM IN socket on
the Polysix’s rear panel is disabled when the
parameter is set to any other value than 64. A
pedal plugged to this connector is disabled in
this case!
4.2.4
4.2.4 4.2.4
4.2.4 VCF VELOCITY MO
VCF VELOCITY MO VCF VELOCITY MO
VCF VELOCITY MODE (CC #19)
DE (CC #19) DE (CC #19)
DE (CC #19)
This parameter is active only for MIDI Notes. It
doesn't work with instrument's keyboard!
The parameter selects type of the VCF cutoff
frequency modulation by received MIDI Notes
Velocity. It can be temporarily changed by MIDI
CC Nr. 19 - see chapter 5.1.2.2.
The parameter value is 0 to 3. Four modes are
available thus (see also fig. 8 on next page):
•
0 0 0 0
Æ
Æ Æ
Æ
Average Average Average Average ---- Positive: Positive: Positive: Positive: The VCF cutoff
frequency is modulated directly
proportionally to average velocity valueof all
active MIDI Notes.
•
1 1 1 1
Æ
Æ Æ
Æ
Average Average Average Average ---- Negative: Negative: Negative: Negative: The VCF cutoff
frequency is modulated inversely
proportionally to average velocity value of all
active MIDI Notes.
•
2 2 2 2
Æ
Æ Æ
Æ
Last Note Last Note Last Note Last Note ---- Positive: Positive: Positive: Positive: The VCF cutoff
frequency is modulated directly
proportionally to velocity value of last
received MIDI Note.
•
3 3 3 3
Æ Æ Æ Æ
Last Note Last Note Last Note Last Note ---- Negative: Negative: Negative: Negative: The VCF cutoff
frequency is modulated inversely
proportionally to velocity value of last
received MIDI Note.