CHD 8-427, Руководство пользователя

Страница: 11 / 32

Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface
P6 P6 P6 P6----M M M M Owner‘s Owner‘s Owner‘s Owner‘s Manual Manual Manual Manual
8 88 8----427 / v. 1.00 427 / v. 1.00 427 / v. 1.00 427 / v. 1.00
Copyright © 2021 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
11
11 11
11
Table 3 Table 3 Table 3 Table 3 – –– – Additional LFO waveforms Additional LFO waveforms Additional LFO waveforms Additional LFO waveforms – –– – continue continue continue continue
Param. Param. Param. Param.
value value value value
LFO waveform LFO waveform LFO waveform LFO waveform
Param. Param. Param. Param.
value value value value
LFO waveform LFO waveform LFO waveform LFO waveform
10 Square 25% 37 Sine
11 Square 37,5% 38 Sine 2nd Harmonics
12 Square 50% 39 Sine 3rd Harmonics
13 Square 62,5% 40 3 Stairs Up
14 Square 75% 41 3 Stairs Down
15 Square 87,5% 42 4 Stairs Up
16 Trapezoid 25% 43 4 Stairs Down
17 Trapezoid 37,5% 44 5 Stairs Up
18 Trapezoid 50% 45 5 Stairs Down
19 Trapezoid 62,5% 46 Exp
20 Trapezoid 75% 47 Exp Inverted
21 Pulse 12,5% 48 Log
22 Pulse 25% 49 Log Inverted
23 Pulse 37,5% 50 Noise 1
24 Pulse 50% 51 Noise 2
25 Pulse 62,5% 52 Noise 3
26 Pulse 75% 53 Noise 4
27 Peak 25% 54 Noise 5
28 Peak 37,5% 55 Groove 1
29 Peak 50% 56 Groove 2
30 Peak 62,5% 57 Groove 3
31 Peak 75% 58 Groove 4
32 Sink 25% 59 Groove 5
33 Sink 37,5% 60 Groove 6
34 Sink 50% 61 Groove 7
35 Sink 62,5% 62 Groove 8
36 Sink 75% 63 Random
The Groove waveforms (parameter values 55 to 62) simulate a rhythmic sequences for the VCF modulation.
They are primarily designed for synchronization with MIDI Clock (chapter 4.2.8) and for lower speeds of the LFO
(chapter 4.2.9). The Random waveform (parameter value 63) works standard way – it periodically sets random
level of the VCF cutoff frequency.
4.2.8
4.2.8 4.2.8
4.2.8 VCF LFO SYNC (CC #23)
VCF LFO SYNC (CC #23) VCF LFO SYNC (CC #23)
VCF LFO SYNC (CC #23)
The parameter selects synchronization mode for the additional software LFO. It can be temporarily changed by
MIDI CC Nr. 23 - see chapter 5.1.2.2.
The parameter value is 0 to 3. Four synchronization modes are available (see fig. 10):
•
0 0 0 0
Æ Æ Æ Æ
Fixed: Fixed: Fixed: Fixed: The additional software LFO rate is controlled by interface clock generator. The fixed tempo is set
by VCF LFO RATE parameter directly (see chapter 4.2.9 and table 10 in chapter 6.5).
•
1
1 1
1
Æ Æ Æ Æ
MIDI:
MIDI: MIDI:
MIDI: The rate of the additional software LFO is derived from the external MIDI Clock
9 99 9
. Frequency of
incoming MIDI Clock is divided - dividing ratio is selected by VCF LFO RATE parameter (see chapter 4.2.9 and
table 10 in chapter 6.5).
9
Transmitting of MIDI Clock must be enabled in your DAW / sequencer! Maximal allowed tempo (BPM) is limited – see table 10.