CHD 8-427, Руководство пользователя

Страница: 5 / 32

Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface
P6 P6 P6 P6----M M M M Owner‘s Owner‘s Owner‘s Owner‘s Manual Manual Manual Manual
8 88 8----427 / v. 1.00 427 / v. 1.00 427 / v. 1.00 427 / v. 1.00
Copyright © 2021 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
5
55
5
Fig. 4 Fig. 4 Fig. 4 Fig. 4 – –– – MIDI mode block diagram MIDI mode block diagram MIDI mode block diagram MIDI mode block diagram
Remote control of instrument’s keyboard, selected buttons on the instrument panel and VCF modulation is
allowed in the MIDI mode:
•
Instrument’s keyboard (
①
on fig. 3 and 4) is controlled by MIDI Notes in parallel manner – both instrument’s
own keyboard and MIDI Notes can be uses simultaneously (see chapter 5.1.1).
•
KEY ASSIGN MODE buttons (
②
on fig. 3 and 4) are controlled by MIDI CCs (Control Changes) in parallel
manner – both instrument’s buttons and MIDI CCs can be uses simultaneously (see chapter 5.1.2.2).
•
PROGRAMMER buttons (
③
on fig. 3 and 4) are controlled by MIDI Program Change command in parallel
manner – both instrument’s buttons and MIDI Program Change can be uses simultaneously (see chapter
5.1.5).
•
VCF fcM IN input (VCF cutoff frequency -
④
on fig. 3 and 4)
is
controlled by interface parameter. VCF fcM IN
input for external pedal is disabled when the interface controls the VCF modulation (see chapter 5.1.2.2).
•
Instrument’s VCF can be also modulated by additional software LFO (
⑦
on fig. 4) controlled by the interface
parameters.
•
ARPEGGIATOR speed (
⑤
on fig. 3 and 4) and source of the arpeggio synchronization are controlled by
interface parameters. SPEED knob on istrument panel is disabled when the interface controls the arpeggiator
(see chapter 5.1.2.3). External arpeggiator triggering is still allowed – the ARPEGGIO TRIG IN input (
⑥
on fig.
3 and 4) has the highest priority.