CHD Elektroservis TPE-1, Руководство пользователя, Страница: 9 / 24

Tone Parameters Editor Tone Parameters Editor Tone Parameters Editor Tone Parameters Editor & Controller & Controller & Controller & Controller
Owner’s Manual Owner’s Manual Owner’s Manual Owner’s Manual
Model TPE Model TPE Model TPE Model TPE----1 / BIOS ver. 1.00 1 / BIOS ver. 1.00 1 / BIOS ver. 1.00 1 / BIOS ver. 1.00
Copyright © 2018 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
9
99
9
4
44
4 BASIC OPERATION
BASIC OPERATION BASIC OPERATION
BASIC OPERATION
After all necessary data are loaded to SAVVY, it is prepared for normal operation. All functions of the editor can
be controlled by buttons on the front panel of the device.
4.1 4.1 4.1 4.1 INITIALIZATION SEQUENCE INITIALIZATION SEQUENCE INITIALIZATION SEQUENCE INITIALIZATION SEQUENCE
When the SAVVY is switched on, the reset sequence is executed. During this
sequence, display indicates the actual operational system and its versions.
The communication is set automatically to direction indicated by
green LED
① ① ① ①
and the display shows number of the actually active tone
② ② ② ②
.
4.2
4.2 4.2
4.2 COMMUNICATION DIRECTION
COMMUNICATION DIRECTION COMMUNICATION DIRECTION
COMMUNICATION DIRECTION
SAVVY can only work in one direction
only work in one direction only work in one direction
only work in one direction in real time. It can either transfer data from a controller to an instrument
or from an instrument to a controller, not not not not in both directions simultaneously! simultaneously! simultaneously! simultaneously!
To set the communication direction:
1. To change the communication direction press button
① . ① . ① . ① .
2. The actual direction is indicated by two LEDs – green LED
② ② ② ②
for
direction or yellow LED
③ ③ ③ ③
for direction.
Figure 4
Figure 4 Figure 4
Figure 4 ---- Controller to instrument communication direction
Controller to instrument communication direction Controller to instrument communication direction
Controller to instrument communication direction
Figure 5
Figure 5 Figure 5
Figure 5 ---- Instrument to controller communication direction
Instrument to controller communication direction Instrument to controller communication direction
Instrument to controller communication direction
For the instruments that use dual tone Patches (e.g. Roland MKS-80), display
indicates request to select the tone layer first (“A
A A
A ----B.
B. B.
B.” or “U
U U
U----L.
L. L.
L.”)
① ① ① ①
.
The required tone layer has to be selected by or button
② ② ② ②
.