CHD Elektroservis TPE-1, Руководство пользователя, Страница: 10 / 24

Tone Parameters Editor Tone Parameters Editor Tone Parameters Editor Tone Parameters Editor & Controller & Controller & Controller & Controller
Owner’s Manual Owner’s Manual Owner’s Manual Owner’s Manual
Model TPE Model TPE Model TPE Model TPE----1 / BIOS ver. 1.00 1 / BIOS ver. 1.00 1 / BIOS ver. 1.00 1 / BIOS ver. 1.00
Copyright © 2018 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
10
10 10
10
4.3 4.3 4.3 4.3 SELECT TONE SELECT TONE SELECT TONE SELECT TONE
Actual selected tone number is shown on display
③ ③ ③ ③
. Tone number can be changed / selected manually or by
Bank Select and Program Change MIDI commands from an instrument or a connected controller / PC (see
chapter 1.3.1 for system parameter description).
To manually change the tone:
1. Press button
① ① ① ①
to increment the tone number.
2. Press button
② ② ② ②
to decrement the tone number.
3. To browse the memory bank, press and hold either or button.
The browsing speed is gradually increased when holding the button for
a longer time.
4. Display indicates selected tone number
③ ③ ③ ③
and SAVVY automatically transmits the new tone data to the
instrument (if direction is active) or to the controller/PC as MIDI CCs
13 13 13 13
(if
direction is active).
4.4
4.4 4.4
4.4 EDIT TONE
EDIT TONE EDIT TONE
EDIT TONE
Tone data (individual tone parameters) can be edited either from MIDI controller or instrument (see chapter 4.2
and Manual Supplements for the supported instruments).
If the tone data are changed / edited, it is indicated by red LED
① ① ① ①
.
All such changes of tone parameters are temporary in the tone edit buffer!
LED indicates that the tone has been changed and should be saved to
keep edited values.
4.5
4.5 4.5
4.5 SAVE TONE
SAVE TONE SAVE TONE
SAVE TONE
Edited tone can be saved in any of the SAVVY´s internal memory locations
14 14 14 14
. SAVVY´s internal Tone memory
bank is independent on the tone memory of the instrument. It works as a MIDI Memory Expander or
“Cartridge” thus
.
To save the tone:
1. Press button
①
① ①
①
. LED
②
② ②
②
starts blinking.
2. Use
③ ③ ③ ③
and
④ ④ ④ ④
buttons to select desired memory location
number
⑤ ⑤ ⑤ ⑤
in which the tone will be stored
15 15 15 15
.
3. Press button again. The LED
② ② ② ②
turns off.
4. The tone is saved now.
To interrupt the saving procedure press the button
⑥
⑥ ⑥
⑥
. The LED stops blinking and the display
shows original tone number. Tone in edit buffer remains unchanged and can be further edited or saved later.
13
The data tramission to controller / PC can be deactivated by system parameter for details see chapter 1.3.1 .
14
For the available number of memory locations see the manuals of the instrument´s profiles
15
If the selected tone number is different from the actual tone number, the number blinks.