CHD Elektroservis TPE-1, Руководство пользователя, Страница: 8 / 24

Tone Parameters Editor Tone Parameters Editor Tone Parameters Editor Tone Parameters Editor & Controller & Controller & Controller & Controller
Owner’s Manual Owner’s Manual Owner’s Manual Owner’s Manual
Model TPE Model TPE Model TPE Model TPE----1 / BIOS ver. 1.00 1 / BIOS ver. 1.00 1 / BIOS ver. 1.00 1 / BIOS ver. 1.00
Copyright © 2018 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
8
88
8
3.2 3.2 3.2 3.2 LOAD THE TONE BANK LOAD THE TONE BANK LOAD THE TONE BANK LOAD THE TONE BANK
SAVVY has its own independent memory bank for storing the tones (sounds). After the factory reset (new
operational system (OS) load), default tone is stored in all tone memory locations!
It is recommended to load basic set of tones to the internal memory. We have prepared tone banks for each
supported instrument
9
99
9
from available factory presets.
To load tone memory bank:
1. Visit our website www.chd www.chd www.chd www.chd----el.cz el.cz el.cz el.cz
and download the “mid” file
①
① ①
①
with required tone bank for
your instrument
10 10 10 10
.
2. Launch your DAW or MIDI dump
software
11
11 11
11
in your computer and
open the previously
downloaded tone bank file.
3. Connect the SAVVY with a computer
12 12 12 12
as shown on picture
② ② ② ②
.
4. Set communication to direction by SLCT button
③ ③ ③ ③
. It is indicated by green LED
④ ④ ④ ④
.
5. Play the MIDI file in DAW or Send the dump
⑤ ⑤ ⑤ ⑤
.
6. DUMP decimal point on display indicates receiving of the data
⑥
⑥ ⑥
⑥
.
9
Note: You can not load the original or third party sound banks dedicated for your instrument. SAVVY has its own bank format to accomodate larger
quantities of tones and special parameters originally not available on your instrument (Modifiers values are stored alongisde the original tone data).
Check the chapter 5.3 to see how to use the standard tone banks with SAVVY.
10
All available files are standard SMF0 format compatible with any MIDI sequencer or MIDI SysEx Dump utilities. The library of supported
instruments is continuously increasing.
11
Recommended MIDI dump software: MS Windows
MS Windows MS Windows
MS Windows ---- Bome Send SX (www.bome.com/products/sendsx), Apple OSX
Apple OSX Apple OSX
Apple OSX ---- Snoize SysEx Librarian
(www.snoize.com/SysExLibrarian) … or any MIDI sysex capable DAW.
12
Certain cheap MIDI interfaces are known for unreliable transmitting of MIDI SysEx data. Please use only professional products for MIDI SysEx
communication i.e. MOTU, Roland, Edirol, Yamaha, Steinberg, Emagic, etc. All above mentioned products are copyright of their respective owners.