CHD Elektroservis JU6-KBD, Руководство по установке

Страница: 3 / 12

JU6-KBD
MIDI Interface for Juno-6 Keyboard
Model 8-429 ver. 1.0
Copyright © 2010 CHD Elektroservis.
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
3
1. INTRODUCTION
The Roland Juno-6 Keyboard MIDI Interface enables the integration of MIDI in your Juno-6
instrument. The instrument's keyboard and arpeggiator can be controlled with this MIDI interface.
1.1. MIDI INTERFACE KIT PARTS
The supplied MIDI interface kit contains all necessary parts, materials, and detailed installation
instructions. The kit contents:
1. MIDI Interface board
2. Bunched cables with
connectors
3. Coupling
pieces
(screws, nuts, washers
etc.)
4. CD-ROM with the user
and installation manuals
and software
1.2. GENERAL INFORMATION
The installation of all interface components is very easy. If you follow the instruction from this
manual there will be no major problems during the installation procedure.
The cover of the instrument will not be markedly damaged during the installation. The physical
appearance of the vintage instrument remains nearly the same as before the installation. If necessary,
the interface can be removed and the instrument restored back to original appearance. All original
features of the Roland Juno-6 are kept. The instrument can be used the same way as before the
retrofitting.
The following tools are necessary for the installation: Phillips screwdriver, driller, drills 3,2 and 16
mm, smaller rasp, pliers, soldering iron (a low heat iron and soldering paste).
Attention ! Disconnect the instrument form the mains prior to the installation. Otherwise,
there is a risk of the electric shock!
The producer is not responsible for any eventual mechanical or electrical damage of the
instrument caused by the infringement of the described installation procedure or by careless
manipulation during the installation of the MIDI interface!