Configuring Through a Web Browser
CHCNAV i73+ GNSS USER GUIDE
| 2022-3
P a g e | 51
In this screen, you can configure all the data logging parameters, and determine whether the
recording files will be affected by the FTP Push. The parameters are mainly as follows:
➢
Auto Record
: on or off.
➢
Sample Interval
: Select the observable rate from the dropdown list.
➢
Elevation Mask
: Enter the elevation mask.
➢
Duration Time
: Set the duration of data logging.
➢
Site Name
: Enter the name of the site.
➢
Antenna Height
: the measured height value.
➢
Measure way
: Antenna Phase Center, Vertical Height, Slant Height
➢
Storage Format
: Select the format of the data store.
➢
RINEX Version
: OFF, 3.02, 2.11
➢
Start Date:
Select
Yes
or
No
option to determine whether to auto record start date.
➢
Apply Time:
Select
Yes
or
No
option to determine whether to auto record apply time.
➢
Integral Point Store:
Select
Yes
or
No
option to determine whether to allow receiver
to save data every hour.
➢
Circulating Memory
: Select
Yes
or
No
option to determine whether to auto delete
old files if the storage space is full.
➢
Repeat Observations:
Select
Yes
or
No
option to determine whether to turn on to
record a single observation.
➢
Store Location:
Internal Storage, External Storage.
➢
Assigned Storage:
The assigned memory size of current thread(for example, Record
1) is 10000MB
➢
Observer:
Enter the name of observer.
➢
Observer Agency:
Enter the name of observer agency.
➢
FTP Push
: Decide whether to push the stored files to the FTP server of your choice.
Содержание i73 Plus
Страница 16: ...Getting Started with i73 CHCNAV i73 GNSS USER GUIDE 2022 3 P a g e 16 Transport Hard Case...
Страница 59: ...Configuring Through a Web Browser CHCNAV i73 GNSS USER GUIDE 2022 3 P a g e 59 Connection Protocol NTRIP2 0...
Страница 61: ...Configuring Through a Web Browser CHCNAV i73 GNSS USER GUIDE 2022 3 P a g e 61 Connection Protocol NTRIP...
