WGS84 Lat/Lon/H, WGS84 X/Y/Z.
Coordinate
: depend on the coordinate format user choose.
(3)
Tap
ok button at the bottom of
New
point screen to save the point.
4.3
Measure Points
Note
: To ensure the accuracy of the coordinates measured; please perform
measurements after the rover receiver receives correction data (with correction LED
flashes once per second) and gets a fixed solution.
4.4
Measure Points in PDA Mode
(1)
In the main menu, tap
Survey
→ tap
PT Survey
.
(2)
Enter the point name in the input frame on the first row.
(3)
Notes
: The system will automatically increase the numeric component of the
measured point name.
(4)
The measured points will be automatically increased from “P1”, by default.
(5)
If necessary, enter the feature code in the input frame on the second row.
(6)
For [Method] row, click the method follows, and select the right Method for the
survey from the dropdown list.
(7)
Notes
: Users can tap
Setting
icon which is located at upper right to configure the
settings of each measurement method in the pop-up
Survey Option
screen.
(8)
The auto survey function is available for two measurement modes:
Topographic
PT
Mode
, Compensate PT Mode.
(9)
When untick
Auto Survey
in the
Survey Option
screen:
(10)
If the settings of the selected measurement method have been changed, click
left arrow at upper left directly to save the change and go back to the
Point Survey
screen.
(11)
Tap
button, hold the range pole still and vertical until the countdown
timer disappears, and then, move to next point and continue the survey.
(12)
To exit the
Auto Measure
mode, tap
button.
4.5
Point Adjust (Site Calibration)
Point adjust, also known as “site calibration”, is used to transform WGS-84 coordinates
into local grid coordinates.
