Getting Started with X900U+
16
2.5
Connecting to Controller with LandStar 7
This section uses
Smartphone
as the example to show how to connect the receiver to
the controller using LandStar 7 via Bluetooth.
Turn on the receiver → Launch LandStar 7 → press config on the bottom of the screen
→ choose
Connect
.
In the
Connect
screen, set
Manufacturer
as
CHC
,
Device Type
as
X900U+
,
Connection
Type
as
Bluetooth
.
Tap
Bluetooth
icon at the end of Bluetooth row, press
Bluetooth Manager
and connect
to the receiver’s Bluetooth whose name is the GNSS-XXXXXXX (the SN of the current
receiver).
One step back, choose paired Bluetooth device with the receiver’s SN. Set
Antenna
Type
as
C
and press
Connect
on the lower right of the screen.
2.6
Firmware Upgrade
(1)
Connect the receiver to PC with data cable. Please keep the receiver power off.
(2)
Double click the proper firmware file (.exe), go to
Connect
→
Setup
, choose the
correct port and click
OK
. Sometimes you need to run the firmware as
administrator. Find the firmware in PC and double-click on it.
(3)
Click
Link
and then
Update
. Then please power on the receiver and the uploading
will start automatically.
