CHCNAV CHC E91, Руководство пользователя

Страница: 20 / 66

Getting Started with E91
20
2.7 Downloading Logged Data
Data logging involves the collection of GNSS measurement data over a period at a
static point or points, and subsequent post-processing of the information to accurately
compute baseline information. Data logging using receivers requires access to suitable
GNSS post-processing software such as the CHC Geomatics Office (CGO) Software.
The procedures of downloading logged data in the receiver are as follows:
Switch on the receiver and connect it with a computer by USB Cable. After the
successful connection, a removable disk named as the Serial Number (SN) of the
receiver will appear on the computer.
Double click the removable disk and you will see the folder named as “repo”.
Double click this folder, you will see 9 folders. The “push_log” folder is used to
save the log files, and the other 8 folders represent different logging session and
are used for store static data.
Double click the folder that you have configured to store the static data, you will
see the folder(s) created by the E91 system automatically and named by the date
which is decide by GPS time when you start to log data.
Select the destination folder and double click it, and then two folders named as
different data format (hcn and rinex) will be displayed.
Select the data format that you has configured to save the static data, you will find
the static raw data.